Comfortzone electric underfloor heating mats are designed for fast, easy installation in larger more regular shaped rooms. The 3.5mm heating cable is pre spaced on self adhesive backed mesh to ensure an even spread of heat under your floor. The electric underfloor heating cable is connected to a 3m cold tail that can be connected to a programmable thermostat for energy efficient heating when you need it.
Take the chill off your floor
Electric underfloor heating is commonly used as a secondary or supplementary heating system or to take the chill off a tiled floor. You still have your central or electric heating system but install an electric underfloor heating system to add an extra bit of comfort and luxury! The 3.5mm cable is thin enough for use in refurbishment projects as there is only a very slight buildup in the floor. The heating system can be concealed within the tile adhesive and is extremely popular in kitchens, bathrooms and wet rooms because it aids floor drying and prevents mould and condensation.
Electric underfloor heating can be used as your primary heat source and can replace central heating systems in well insulated rooms where at least 80% of the floor can be covered with an underfloor heating system. Our 150W/m2 system is suitable for use a primary heat source in these well insulated applications.
We also have a more powerful 200W/m2 system that is ideal for use in areas of high heat loss, such as older properties with poor insulation or conservatories. The 200W/m2 systems do not get any hotter, but they reach their target temperature faster which helps to combat heat loss.
For primary heating applications we always recommend the use of an underfloor heating insulation board to ensure all of the heat energy is radiated up into the room. Without an extra layer of insulation you waste electricity and money heating the sub floor before any heat can radiate into the room.
Sizes and outputs
Visit our downloads centre for data sheets, brochures and installation guides. You’ll find all the information on sizes, outputs and resistance ratings there.
Other floor finishes
Electric underfloor heating is suitable for use under a really wide range of floor finishes, the most popular being tiles. You can also install Comfortzone under carpet (less than 2.5 tog), laminate or vinyl flooring too but you must lay a bed of flexible self leveling compound to seal in the heating cables before installing the floor finish. You can adhere the floor finish to the newly leveled substrate but you must not use mechanical fixings such as screws or nails, as these can damage the heating cable. If you’ve got an application that you’re not sure about contact our team today and we’ll be glad to go through it with you.